20MM MV80 24VAC MICRO SOLENOID VALVE
$32.50
An economical micro control valve with high flow and low pressure loss for use in drip, spray and pop up sprinkler watering systems. Ideally suited to residential use to meet standard water meter flows. Also available with a Viton diaphragm option, suitable for chemical spray application.
FEATURES
- Body material Nylon 66 30% glass filled
- Natural Nitrile elastomer diaphragm, or optional Viton diaphragm
- Bonnet screws stainless steel 304
- 304 Stainless steel 40 mesh screen (on inlet side of valve)
- WATERMARK approval ATS 5200.030-2004
ELECTRICS
- Solenoid encapsulant Nylon 66 (30%) Glass filled
- Magnetic stainless steel grade plunger
- Natural Nitrile elastomer plunger tip
- Stainless steel 302 plunger spring
- Voltage 24Vac 50Hz or optional 12vac
- Voltage tolerance +10% or -10%
- Power consumption 8 VA
- Inrush current 320mA
- Holding current 260mA
OPERATION
The valve will operate correctly with in the following conditions:-
- Ambient temperature – 2° C to 60° C
- Relative Humidity – 0% to 100%
- Temperature of water – 2° C to 80° C
- Direction of flow markings on body (check before installing)
- Minimum operating pressure – 20kpa
- Maximum operating pressure – 1250kpa
- Supply pipe velocity range – 1.2 m/s to 6.5 m/s
- Opening speed – 1 sec
- Closing speed – 1 sec
CLICK HERE FOR MV80 PDF